Descrizione prodotto
[:it]CARATTERISTICHE TECNICHE
Specification of the Power Amplifier Unit
- T-Amp IC Tripath TA2024
- Output Power 2x15W @4ohm
- 2x6W @8ohm(RMS)
- Signal-to-Noise Ratio (SNR) 98dB
- Dynamic Range 98dB
- IHF IM Distortion 0.10% @ 1W, 4ohm
- THD+Noise Audiophile Quality 0.03% @ 9W 4ohm
- 0.1% @ 11W 4ohm
- 0.1% @ 6W 8ohm
- High Power 10% @ 15W 4ohm
- 10% @ 10W 4ohm
- Power Efficiency 81% @ 15W 4ohm
- 90% @ 10W 8ohm
- Input Audio IN RCA (Left/Right) x 1
- Power Socket (5.5mm/2.1mm) x 1
- Speaker OUT RJ45 x1
- Other Volume & Knob Power ON/OFF switch x
- Power Indicator (Blue LED) x1
- Power Supply DC 12V-13.2V (max.)
Specification of the Headphone Amplifier Unit
- Signal-to-Noise Ratio (SNR) 92dB
- Power Output 3.0 Watts per channel on 33 Ohm
- Headphone
- Frequency response 15 Hz – 100 kHz -1db
- Input Impedance 10k Ohms
- Input Audio CD IN RCA (Left/Right) x 1 [3Vpp max.]
Specification of the Pre Amplifier Unit
- Input Impedence 10K Ohms unbalanced
- Max Input Level +18dBV
- Frequency Response 25Hz – 150KHz (+/- 3dB)
- Output Power 450 mW/side,THD+N:0.1% (@16 Ohms)
- 108 mW/side,THD+N:0.1% (@300 Ohms)
- Power Socket (5.5mm/2.1mm) x 1
- Output Audio Headphone OUT 3.5mm jack x 1
- Switch Knob Audio and power switch x 1
- Power Supply DC 12V-13V (max.)
- 4.4 Specification of the AC Adaptor
- AC Input Universal AC 100V-240V/50-60Hz
- DC Output DC 12V 5A (60W)
- DC Plug DC 2.1mm
- Ripple & Noise <= 25mV
- Over-load Protection 105%-150%
- Over-voltage Protection 115%-150%
[:]
Reviews
There are no reviews yet.