Ernestolone Phono


The Magic of ERNESTOLONE for your turntable
Tube integrated amplifier with Phono preamplifier. The tube preamplifier section is completely separate from the power amplifier section, Phono preamplifier MM—1 input Line and 1 input Phono.


Descrizione prodotto

  • Only 75mm x 70mm x 110mm. • 25wpc + 25wpc @ 4 Ohms.
  • 18wpc + 18wpc @ 6 Ohms. • 12wpc + 12wpc @ 8 Ohms.
  • Front panel jacks for headphones and iPod/iPhoneMP3 inputs, input to line level input.l Selector Line/Phono.
  • Rear panel connections for LINE input, PHONO input and speaker outputs
  • High power allows for use with a wide variety of quality loudspeakers
  • Spectacular audio performance!

For excellent performances we recommend the COCAINE speakers and NERO electronics.

Output Power 2x25W
Signal-to-Noise Ratio (SNR) 98dB
Dynamic Range 98dB
THD+Noise Audiophile Quality 0.03%, 0.11%, 0.15%
High Power 10% @ 15W 4Ohm 10% @ 10W 4Ohm
Input Audio IN RCA (Left/Right) x 1
Power Socket 2.1mm x 1
Speaker OUT Banana socket x4
Other Volume & Knob Power ON/OFF switch x
Power Indicator (Blue LED) x1
Power Supply DC 12V-13.2V (max.)
Power Output 600m Watts per channel on 32 Ohm
Frequency response 15 Hz – 100 kHz -1db
Input Impedence 10k Ohms
Sensitivity 0.35mV for 350mV Output at1KHz
Input 47k Ohm
Vacuum Tube (exchangeable), 6DJ8/6922 series or 12AU7 series
Signal-to-Noise Ratio (SNR) Amplifier 92dB
THD + Noise 0.05% @ 10k ohm 0.15% @ 33 ohm
Input Audio CD IN RCA (Left/Right) x 1 [3Vpp max.]
Output Audio OUT 3.5mm x 1
Headphone OUT (3.5mm) x 1
Knob Audio and power switch x1
Power Indicator Amplifier (Blue LED under Tube Socket) x1
Volume Knob x1
Power Supply DC 12V-13V (max.)
AC Input Universal AC 100V-240V/50-60Hz
DC Output DC 12V 5A (60W)
DC Plug DC 2.1mm
Ripple & Noise <= 25mV
Over-load Protection 105%-150%
Over-voltage Protection 115%-150%
Dimensions AC Adaptor (L)78mm x (W)50mm x (H)33mm


There are no reviews yet.

Be the first to review “Ernestolone Phono”